Find a Distributor

Lids and Lid Accessories

High Density Polyethylene Lids
ItemDescriptionVent
Capacity
(GPM)
Part NumberStd. Pkg.
- 22" Lid and ring with air vent 400 63679 6
- 22" Lid, ventless with ring *   63863 6
- 16" Lid and ring with 4" center lid/air vent 100 60038 14
A 16" Lid with 4" center lid/air vent 100 60011 19
B 16" Lid and ring with blue snap-in vent 200 63485 12
- 16" Lid and ring with 3" center thread   63868 12
- 16" Ring only   60012 -
- 16" Lid, ventless with ring   60367 10
16" Lid, ventless   60365 -
- 4" Lid (air vent assembly for 16" lid)   60019
- Blue snap-in vent for 16" lid (63485)   63539 -
- 8" Lid, ring & air vent   60032 32
8" Lid with air vent
(For select tanks manufactured prior to 2/2/08)
  60002 32
- 8" Ring only (for 60002 lid)   60003 -
- Snap on air vent for 8" lid (60002)   61727 -
E 8" Lid with blue snap-in vent 
(For select tanks manufactured after 2/2/08)
200 63480 28
- Blue snap-in vent for 8" lid (63480)   63482 -
5" Lid with ball check air vent (for tanks manufactured prior to 2/1/00)   60322 72
5” Lid with ball check air vent, with gasket   63484 48
- 5" lid with 2" FPT (does not include vent cap)   63264 45
- 5" Lid, hinged, (for 52 & 68 gallon flat bottom & 110 low profile)   63673 25
- EPDM gasket for 5" lids 60322, 63264 or 63484   60366 -
- 18" lanyard for 8" lid and 16" non-hinged lid (tethers lid to tank)   62531
- Ethafoam gasket for 16" non-hinged lid   62941 -
- Stainless steel screw for 8" and 16" rings   60081 -
- Strainer basket for 16" fill-opening (7" depth)   67374 -
* There is no connection point on this lid for a lanyard.

 

Hinged Lids


The hinged lid is manufactured from a co-polymer material for strength, durability and excellent chemical resistance. Our unique locking tab allows you to easily slip a padlock through it and secure your lid from theft or spills. The lid is interchangeable with a standard 16" lid and ring assembly if you choose to replace your existing lid.

 

Specific features of the lid:

  • Easy open/close - opens a full 180 degrees
  • Comes complete with a baffle vent assembly which allows for adequate venting when bottom filling your tank
  • Unique locking tab
  • All parts of lid may be ordered as repair parts
Hinged Lids
DescriptionVent
Capacity
(GPM)
Part NumberStd
Pkg
22" Hinged lid with ring & vent 250 63874 8
16" Hinged lid with ring & vent 100 62532 6
16" Hinged lid with vent assembly, without ring 100 62826 6
16" Hinged ventless lid, with ring   63390 6

 

16" Hinged Lid Repair Parts
DescriptionPart NumberStd
Pkg
Vent assembly 62827 -
Ring Assembly 62828 -
Hinge Assembly 62829 -
EPDM O-ring gasket for lid 62830 -
Neoprene O-ring for ring 62831 -

 

Part dimensions may vary and are subject to change without notice.